Filtration Pilot Plant Educational Equipment Vocational Training Filtration Pilot Trainer

AFW014 Filtration Pilot Plant Educational Equipment Vocational Training Filtration Pilot Trainer
INTRODUCTION
This fi ltration plant mainly consists of a sand fi lter and of an activated carbon fi lter; fi ltered water is collected into a tank of stainless steel from which samples for proper laboratory analyses can be extracted. An in-line turbidimeter enables to measure the turbidity of water fl owing in and out of fi lters.Process control, data acquisition and supervision are automatically carried out by a microprocessor controller and by a specifi c control and supervision software that enables the remote control of various operational
Parameters

TRAINING PROGRAM:
The process unit enables to develop and analyze the following issues:• mechanical filtration
chemical fi ltration
main parameters affecting fi ltration
infl uence of feed fl ow rate on fi ltration
automatic PID control 
plant supervision (only for 

TECHNICAL CHARACTERISTICS:
Framework of AISI 304 stainless steel with castors
Sand fi lter of borosilicate glass with decresing particle size and capacity of 30 l
Activated carbon fi lter of borosilicate glass with capacity of 30 l
4 pressure gauges, with range of 0 to 10 m of water column
Centrifugal pump with casing and rotor of AISI 304 stainless steel and fl ow-rate of 3000 l/h  
Variable area fl owmeter of AISI 304 stainless steel, with range of 100 to 1000 l/h
Metering pump of plastic material for sodium hypochlorite, with fl ow rate of 3 l/h
Metering pump of plastic material for fl occulant, withfl ow-rate of 3 l/h
2 feed tanks of AISI 304 stainless steel with capacity of 120 l

Tank of AISI 304 stainless steel for collecting the fi ltered water with capacity of 200 l
Thermoresistance Pt 100 with sheath of AISI 316 stainless steel
Board-type electronic temperature indicator
Switchboard IP55, complying with EC conformity mark, including plant synoptic and ELCB
Connecting lines and valves of AISI 304 and 316 stainless Steel
Pneumatic control valve of stainless steel AISI 316 for feed fl ow rate of water, Cv = 2.5
Electropneumatic converter (4 to 20 A / 0.2 to 1 bar)• Electronic turbidimeter for measuring the turbidity of the water fl owing in and out of fi lters, with programmable range and 4 to 20 mA output signal
Digital microprocessor PID controller, with two control loops
Supervision software for Windows: it enables to control ONOFF signals, analog signals coming from PID controller, realtime trend and historical trend.Power supply: 230 Vac 50 Hz single-phase - 1,5 kVA.(Other voltage and frequency under request).Dimensions: 2150 x 750 x 2000 mm,Weight: 460 kg,Supplied THEORETICAL – PRACTICAL – EXPERIMENTAL HANDBOOK